2026-11-13

How I Order Dow Corning Products: A 7-Step Checklist for Office Admins Who Aren't Engineers

A purchasing admin's practical checklist for ordering Dow Corning silicone products—covering spec verification, food-grade vs. industrial-grade confusion, and the invoice mistake that cost me $2,400.

Who This Is For (and Why I Made This List)

I'm the office administrator for a 200-person manufacturing company. I manage all industrial material ordering—roughly $180,000 annually across 12 vendors. I report to both operations and finance. And I don't have an engineering degree.

That means I sometimes order things I don't fully understand. Dow Corning products are at the top of that list. The product line is enormous—adhesives, sealants, encapsulants, lubricants, dow corning conformal coatings—and every SKU has specific applications and specs. Order the wrong one and you've wasted money, time, and credibility with the team that submitted the request.

So I built a checklist. Seven steps I run through every time an industrial material order comes in. Takes about 12 minutes. Here it is.

Step 1: Get the Exact Product Name and Number—Not Just "Silicone Coatings"

The first time I ordered dow corning conformal coatings, I searched "Dow Corning coating" on the supplier site and picked the first result. Big mistake. There were at least six different conformal coatings—UV-cure, thermal-cure, moisture-cure—each for different substrates, thicknesses, and operating temperatures.

What happened: the order arrived, the engineer opened the box, and said three words. "This is wrong."

To be fair, the person who submitted the request wasn't clear either. They said "the usual conformal coating." We didn't have a "usual." That was the problem.

What I do now: I don't order until I have the exact product number. If the requester doesn't have it, I ask them to check the old container or the equipment manual. Takes two minutes. Saves two weeks of return processing.

Step 2: Confirm the Grade—Food-Grade vs. Industrial-Grade

Here's a question that came up in our office last year: Can you eat corn starch?

I know that sounds completely unrelated to industrial silicone. But stick with me.

One of our packaging engineers asked if we could use a particular Dow Corning product in a food-adjacent process. My first thought: it's silicone, silicone is inert, should be fine, right? Wrong.

There's a huge difference between food-grade silicone (used in baking mats or food seals) and industrial-grade silicone (used in commercial steel coatings or conformal coatings for circuit boards). Same chemistry family. Different purity standards. Different certifications.

The corn starch question actually helped clarify things. You can eat food-grade corn starch—it's in baking. But industrial corn starch has different processing standards. Same logic applies here. Just because something is "silicone" doesn't mean it's safe for food contact or medical applications.

According to Dow's official product documentation, food-grade and medical-grade silicones require specific certifications (like FDA 21 CFR 177.2600 or USP Class VI). Industrial-grade products don't carry those certifications—not because they're dangerous, but because they weren't tested for that use case.

Bottom line: If the application involves food, skin contact, or medical use, I double-check the grade before ordering. This is a red flag I almost missed once. Won't miss it again.

Step 3: Verify the Supplier Can Actually Invoice You Properly

I learned this one the hard way in 2023. We found a supplier offering dow corning products at about 15% below our regular vendor. I placed a $2,400 order. The material arrived fine.

The problem was the invoice. Handwritten receipt. No tax ID. No itemized breakdown. Finance rejected the expense report outright.

We didn't have a formal vendor-verification process at the time. That $2,400 came out of my department budget. I had to explain to my VP why a legitimate purchase couldn't be reimbursed.

The third time this kind of thing happened (different vendor, same issue), I finally created a one-page vendor checklist. Should have done it after the first incident.

What I check now: Before placing any order over $500, I confirm that the vendor can provide a proper invoice with tax ID, itemized pricing, and credit terms. If they can't, that's a deal-breaker. The savings aren't worth the accounting headache.

To be fair, some smaller distributors are perfectly legitimate and just have outdated systems. But "trust me, we'll send a receipt" isn't good enough for finance. And finance always wins.

Step 4: Match the Product to the Application (Not the Other Way Around)

This is where roof coatings st louis park and commercial steel coatings come in. Different applications, different product requirements.

Our facilities team once asked me to order "silicone roof coating" for a building in St. Louis Park. I found a Dow Corning silicone coating that looked right—but it was designed for industrial steel structures, not commercial roofing. The specs didn't match. We caught it before ordering because the facilities manager happened to read the datasheet.

Lucky break. Not something I want to rely on.

What I do now: I ask two questions before ordering: (1) What surface is this going on? (2) What's the environment—indoor, outdoor, chemical exposure, temperature range? Then I match the product to the answers. Not the other way around.

This sounds obvious. It isn't. When you're ordering 40 items in a week, it's easy to grab the first product that matches the keyword. Slow down on industrial materials. The cost of a mistake is higher than the time you save.

Step 5: Calculate Total Cost, Not Just Unit Price

The upside was saving $600 on a bulk order of Dow Corning sealant from a new supplier. The risk was getting stuck with non-returnable custom product if the specs were off. I kept asking myself: is $600 worth potentially eating $3,000 in unusable material?

I calculated the worst case: complete redo at full price plus rush shipping. Best case: saves $600. The expected value said go for it. But the downside felt catastrophic—we were on a tight project timeline.

I went with the regular supplier. Paid $600 more. Slept fine.

Total cost includes: unit price, shipping, setup fees, rush charges, potential reprint/reorder costs, and the internal time spent fixing problems. The lowest quoted price is almost never the lowest total cost. For industrial materials, reliability beats savings more often than not.

Granted, if you're ordering standard consumables that you've bought before, price shopping makes sense. But for anything with a spec sheet and a cure time, I don't gamble on unknown suppliers.

Step 6: Set Up a Simple Approval Chain (Even If It Feels Like Overkill)

We didn't have a formal approval process for rush orders. Cost us when an unauthorized rush fee showed up on an invoice—$340 that nobody had approved.

After that, I set up a two-step email approval: the requester confirms the spec, and their manager confirms the budget. Takes five minutes. Eliminates the "who approved this?" conversation entirely.

I'm not 100% sure this would work for every company. If you have a proper ERP system, you probably already have this. But for smaller operations running on email and spreadsheets, a simple written approval chain is surprisingly effective.

Step 7: Keep a Vendor Scorecard (This Is the Step Most People Skip)

This is the step I resisted for two years. Felt like busywork. Then I realized I couldn't remember which vendor had messed up our last three orders.

Now I keep a simple spreadsheet: vendor name, order date, product, whether it arrived on time, whether the invoice was clean, and any issues. Takes 30 seconds per order.

The result: after six months, I could see that one vendor had a 40% late-delivery rate. Another had perfect delivery but terrible invoicing. A third was solid across the board. That data changed how I allocated orders. Instead of rotating vendors randomly, I started routing urgent orders to the reliable one.

Take this with a grain of salt: my data set is small (about 8 orders per month). But even with limited data, patterns emerge. And the patterns are usually invisible when you're just trying to get through the week.

Common Mistakes (and How to Avoid Them)

  • Ordering by product name only. "Dow Corning silicone" could mean 30 different products. Get the product number.
  • Assuming all silicone is food-safe. It's not. Check the grade and certification.
  • Skipping the invoice check. A handwritten receipt will cost you more than you save.
  • Buying from the cheapest supplier without checking their track record. The lowest quote isn't the lowest cost.
  • Not documenting anything. When your VP asks why you used Vendor A instead of Vendor B, you need an answer that isn't "I don't remember."

The industry has changed a lot. Dow Corning as a standalone brand was fully acquired by Dow Chemical back in 2016, and the product line now operates under Dow's silicones business. What hasn't changed: the purchasing fundamentals. Get the spec right, verify the vendor, check the grade, and keep records. The tools are better than they were five years ago. The need for a checklist isn't.

Previous: Emergency Chemical Sourcing: A Scenario-Based Guide for 2025 Next: Emergency Flooring Q&A: Mapei Adhesives, Chemistry, and Deadlines